I am in need of a piece of Palo Escrito large enough for a head plate. Will gladly pay reasonable price. NEED ASAP. PLEASE!
| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Anyone HAVE... http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=9527 |
Page 1 of 1 |
| Author: | Dave-SKG [ Mon Nov 27, 2006 5:01 am ] |
| Post subject: | |
I am in need of a piece of Palo Escrito large enough for a head plate. Will gladly pay reasonable price. NEED ASAP. PLEASE!
|
|
| Author: | Alain Desforges [ Mon Nov 27, 2006 3:17 pm ] |
| Post subject: | |
Shoot Dave, sorry I can't help you much besides this little 'Bump'! |
|
| Author: | Dave-SKG [ Tue Nov 28, 2006 7:09 am ] |
| Post subject: | |
Thanks Alain 
|
|
| Author: | Wade Sylvester [ Tue Nov 28, 2006 8:15 am ] |
| Post subject: | |
I may have it Dave, I'll check my leftovers and let you know. 
If you think it is enough of a match? Wade |
|
| Author: | Wade Sylvester [ Tue Nov 28, 2006 12:46 pm ] |
| Post subject: | |
Dave, I have two cuttings from the back that could be book matched into a head plate, depending on how wide you need it to be. You could add another piece in the middle to widden it if need be. You are welcome to them if you think you can use them. 
|
|
| Author: | RCoates [ Tue Nov 28, 2006 2:16 pm ] |
| Post subject: | |
I looked through my scraps and sorry to say nothing usable. I also would like to say I love this wood. One of my very favorites. Please post some pics when you're done Dave |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|